| Lifts
Cantilever Lift
Hydraulic Cantilever Lift
Hydraulic Lift
HI-LIFT Vertical Lift
Hevy-Duty Vertical Lift
BoatPort Floating Lifts
WetPort
Pontoon Lift
Personal Watercraft Lift
Roll-A-Rail
Lift Accessories
Lift Warranty
|
Heavy
Duty Vertical Lifts |
 |
The Hewitt Heavy-Duty Vertical Lift
gives proven safety and protection to the large-boat owner by easily
raising, storing, and launching heavier watercraft in an effortless
operation. With an integrated hydraulic system this lift is built
especially for large or heavy boats, and incorporates all the features
required to safely perform its priceless job for many years to come. |
| Hefty-Arm
Mechanical Lifting System |
Hewitt Hefty-Arm is our original mechanical lifting mechanism
for the Heavy-Duty Vertical Lift. This system requires no
power for situations when electricity is unavailable at
the shore site.
|
| |
|
Features |
|
|
|
Options |
-
Direct Drive unit, 110 volt or 12 volt.
-
Power wheel drive unit, 110 volt or 12
volt.
-
|
|
|
|
|
| |
|
| Features |
- Equal weight distribution on all four corner columns.
- Cycles from fully lowered to fully raised in 2 - 5 minutes
depending on lift size.
- Simple up/down lever operation.
- Biodegradable hydraulic fluid is harmless to any lake or river,
and the fluid's anti-freezing properties simplify winter storage.
- Kit available to retrofit older Hefty Arm lifts.
- Underwater gearbox includes remote vent hose.
- Seals and hoses designed for underwater use.
- 2 HP motor.
- 220V AC power requirement
- Large vertical travel will accommodate changing water levels
without adjustment.
- Extra-long cable bolts allow adjustment for cable stretching.
- Folding arms stabilize lift and prevent frame swaying.
- No side bars to block access to boat.
- Maintenance-free structural aluminum.
- Cables and spool lift out of water helping to prevent rust
and making visual inspection a breeze.
- Leveling legs with quick adjust pins.
- Rubber end caps.
- Self-adjusting cradles and keel protectors.
|
|
Options |
- Centering guide bumpers, rubber cradles and keel protectors.
- Custom canopies in a wide range of colors.
- Corner assist wheels.
- Kit for additional lift height.
- View Accessories
|
| |
Includes water resistant chest with key lock. Houses hydraulic
pump with operation lever and remote vent hose end. |
|
|
|
Simple cable and spool design utilized
to raise lift. |
All pulleys, cables and wheels stay out
of water when lift is in the raised position.
|
Smooth operating guide wheels make lifting
easy. |
|
| Specifications |
| Model / Capacity in
lbs. |
3200 |
6000 |
8000, 10000 &
12000 |
Length (outside of poles) |
106" |
140" |
140" |
Width (inside of poles) |
106" |
114" |
132" |
Width (outside of poles) |
110" |
120" |
138" |
Width (overall) |
113" |
123" |
141" |
Lift Height |
60" |
69" |
69" |
Minimum Draft |
12" |
13.5" |
13.5" |
Min. Draft with Keel Pad |
13.5" |
15" |
15" |
Min. Draft with Optional Kit |
6.5" |
8.5" |
8.5" |
Cable Diameter |
1/4" |
5/16" |
5/16" |
Winch Ratio (wheel to drum - HeftyArm) |
15.8" |
30.9" |
20.6" |
Corner Cable Mechanical Advantage |
2:1 |
2:1 |
3:1 |
Wheel Force (lbs. on 40" wheel) |
18-20 |
18-20 |
18-20 |
Lift Weight in lbs. |
461 |
742 |
825 |
Additional beam widths also available
Hydraulic pump and hoses carry a manufacturer's
2-year warranty. Hydraulic gear box carries a manufacturer's 1-year
warranty.
|
